한국염색가공학회지 (Textile Coloration and Finishing)

  • 제3권2호
  • /
  • Pages.25-33
  • /
  • 1991
  • /
  • 1229-0033(pISSN)
  • /
  • 2234-036X(eISSN)
한국염색가공학회 (The Korean Society of Dyers and Finishers)
권호 표지

Sputter Etching한 Poly(ethylene terrephthalate)와 Nylon 6 Film의 표면특성

Surface Characteristics of Sputter Etched Poly(ethylene terephthalate) and Nylon 6 Films

  • Kang, Koo (Dept. of Chemstry and Materials Tech., Faculty of Eng. and Design, Kyoto Institute of Technology, Matsugasaki, Sakyo-ku, Kyoto, Japan) ;
  • Wakida, T. (Dept. of Chemstry and Materials Tech., Faculty of Eng. and Design, Kyoto Institute of Technology, Matsugasaki, Sakyo-ku, Kyoto, Japan) ;
  • Cho, In-Sul (Dept. of Textile Eng., College of Eng., Yeungnam Univ., Gyongsan) ;
  • Cho, Hwan (Dept. of Textile Eng., College of Eng., Yeungnam Univ., Gyongsan)
  • 발행 : 1991.06.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Poly(ethylene terephthalate)(PET) and nylon 6 films stretched uniaxially and biaxially were sputter etched in the presence of argon gas. The surface of the etched films was investigated using a scanning electron microscope(SEM). While cracks perpendicular to the stretched direction were observed in the uniaxil stretched films sputter etched for 30 min., many protrusions were formed in the biaxial stretched films at the height of 0.3-0.4 gm for PET and $0.1-0.2\mum$ for nylon 6. The tops of two or three protrusions merged etching time increased to 60 min. The contact angle to water of the sputter etched PET and nylon 6 films decreased steeply when etched for one to 3 min. In order to investigate chemical changes on the surface ESCA analysis was carried out. In both films sputter etched $C_{1s}$ intensity decreased and $O_{1s}$ intensity increased compared with the unetched ones.

키워드