DOI QR코드

DOI QR Code

축류압축기 회전익의 후방유동장(I) - 누설와류의 궤적

Floor Field Behind an Axial Compressor Rotor ( I );Locus of Tip Leakage Vortex

  • 조강래 (연세대학교 공대 기계공학과) ;
  • 정의준 (울산대학교 공대 기계공학과)
  • 발행 : 1991.05.01

초록

본 연구에서는 누설와류는 유동에 영향을 미치며 에너지 손실로 된다. 누설 와류에 의한 손실은 다른 원인에 의한 손실에 비교하여 그 비중이 크다. 따라서 누 설와류 특성을 이해하기 위해 설계영각(.alpha.=10.7˚)에서 절현비를 t/C=0.90와 2.71로 바꾸고, 또 절현비가 설계절현비 t/C=0.90일 경우에 영각을 설계 영각 .alpha.=10.7˚와 실 속점의 영각 .alpha.=18.9˚사이에서 바꾸어 회전익 후방의 회전유동장을 측정하여 누설와 류의 거동을 연구하였다.

키워드

참고문헌

  1. ASME, J. of Eng. for Power v.104 no.2 Interaction of Compressor Rotor Blade Wake with Wall Boundary Layer/Vortex in the End-Wall Region Lakshiminarayana, B.;Ravindranath, A.
  2. Trans. ASME, J. of Power v.108 no.1 Behavior of Tip Leakage Flow Behind an Axial Compressor Rotor Inoue, M.;Kuromaru, M.;Fukuhara, M.
  3. AIAA J. v.23 no.7 Numerical Solution of Two and Three-Dimensional Rotor Tip Leakage Models Wadia, A.R.
  4. Bulletin of JSME v.25 Measurement of Three Dimensional Flow Behind an Impeller by Means of Periodic Multy-Sampling with a Slanted Hot Wire Kuromaru, M.(et al.)
  5. ASME J. of Eng. for Gas Turbine and Power v.106 Three-Dimensional Structure and Decay of Velocity Behind an Axial Flow Rotating blade Row Inoue, M.(et al.)
  6. ASME Journal of Engineering for Power v.105 Investigation of the Tip Clearance Flow Inside and at the Exit of a Compressor Rotor Passage-Part I : Mean Velocity Field Pandya, A.;Lakshiminarayana, B.
  7. ASME Gas Turbine Conference Similarity Analysis of Compressor Tip Clearance Flow Structure Greitzer, E.M.(et al.)