Journal of Korea Foundry Society (한국주조공학회지)
- Volume 10 Issue 5
- /
- Pages.435-443
- /
- 1990
- /
- 1598-706X(pISSN)
- /
- 2288-8381(eISSN)
A Study on Characteristics of Al-Pb Strips and Its Sintering Behavior
Al-Pb계 합금분말의 성형 및 소결 특성에 관한 연구
- Moon, Jong-Tai (Dept. of Metallurgical Eng, and Material Science Hongik Univ.) ;
- Lee, Young-Kun (Dept. of Metallurgical Eng, and Material Science Hongik Univ.) ;
- Lee, Yong-Ho (Dept. of Metallurgical Eng, and Material Science Hongik Univ.) ;
- Cho, Sung-Suk (Dept. of Merallurgical Eng. chungnam Univ.)
- Published : 1990.10.20
Abstract
By using the centrifugal atomization, which is one of the rapid solidification processes, Al-5,10wt%Pb alloys which are monotectic alloys were melted at 150K over two liquid phase line in the phase diagram. The melted alloy was poured on the rotating disk, being made into atomized powders, and then the solidified microstructure and morphology of the powder were investigated. This study converted the produced powders into strips by strained powder rolling. According to sintering temperature, the microstructure and hardness were investigated. The solidified structure of the powders were almost cellular dendritic structure. Pb particles (
Keywords