Design of Servo Control System Using Bilinear Transformation Approach

쌍선형 변환법을 이용한 서어보 제어계 설계

  • Published : 1990.03.01

Abstract

In this paper, a new design method in which transient response behavior of a servo~system can be improved, is proposed using a bilinear transformation method which assigns the poles of the closed-loop system in a specified region. The servo-system is a dynamic system which follows the given reference input automatically. In the above meaning, the design of a servo-system is similar to a regulator design problem for the extended system which is resulted from the given system and the reference input by the well known internal moel principle. In the design problem of servo control system, it is supposed that the proposed design method has more practical meaning in comparison to the other design methods, in the views of assigning the characteristic roots of the closed loop system in a specified region satisfying a design specification for the given transient response rather than in the exact positions of the poles. The applicability of the design method proposed in this paper was proved by the simulation results for the angle control problem of an electrical servo mechanism.

본 논문에서는, 문헌[1]에서 보였던 적분형 서어보계의 구성문제를 목표입력이 선형자유계의 출력으로 얻어지는 경우로 일반화하여 확대계수를 얻고 쌍선형변환법에 의해 폐류우프계를 구성하는 설계법을 제안했다. 본 설계법의 유효성을 확인하기 위해, 전기 서어보기구의 각도 제어에 관한 응용 예를 보였다. 실제적인 서어보 시스템의 설계문제에 있어, 그 폐루우프계의 특성근을 정확한 위치에 배치하기보다는 오히려 어떤 요구하는 과도응답이 얻어질 수 있게 하는 영역내에 배치하면 된다는 의미에서 보면, 본 서어보계 구성법은 그 실제적인 의미가 크다고 할 수 있다.

Keywords