Creep and Rupture Life of Al 7075 alloy under step-wise temperature cycling

온도 변동하의 A1 7075 합금의 크리이프 및 파단수명

  • 김창건 (국방품질연구소(창원분소)) ;
  • 강대민 (부산공업대학 산업안전과) ;
  • 구양 (부산공업대학 기계과) ;
  • 박경동 (부산공업대학 기계설계과) ;
  • 백남주 (부산공업대학 생산기계과)
  • Published : 1989.12.01

Abstract

Cyclic temperature creep tests were carried out an AS 7075 alloy specimens were subjected to a constant load and stepwise temperature cycles in which temperature was fluctuated between 30$0^{\circ}C$ and 25$0^{\circ}C$ with three different cycle ratios. The highest frequency of cycling was 1 cycle per 10 hr and the lowest one was 1 cycle per 12 hr. From the creep experimental results with the above conditions the creep strain under cyclic temperature can be predicted easily by introd ucing the equivalent steady temperature because defined by Eq.(16), but the rupture life is 1.1 time than those of constant temperature because of effect of temperature history at tertiary creep range. Besides thlis result, the results of the creep test under cyclic temperature conditions are respectively compayiea with calculated rupture lives using the life fraction law and Eq.(18). The agreement between the obseried rupture times and calculated ones is fairly good. So creep rupture lives can be respectively predicted using life fraction law and Eq.(18).

Keywords