DOI QR코드

DOI QR Code

선반주축계의 동특성 향상에 관한 연구 -주축대와 베드의 보울트 결합을 중심으로-

A Study on the Improvement of Dynamic Characteristics of Spindle-Work System in Lathe - Focused on the Bolt Juint between Headstock and Bed -

  • 신용호 (전북대학교 대학원) ;
  • 박태원 (전주공업전문대학 기계과) ;
  • 홍동표 (전북대학교 공대 기계공학과) ;
  • 정인성 (전북대학교 공대 기계공학과)
  • 발행 : 1988.01.01

초록

본 연구에서는 컬럼모델을 보울트로 고정할 때 접합면에 알루미늄판, 황동판, 스테인리스판 등을 삽입하고 정적강성과 동적특성을 검토하여 이것을 기초로 공작물- 주축대-공구로 형성되고 있는 사이클중에서 선반의 주축대와 베드를 연결하는 결합부에 모델실험을 사용한 게재물을 삽입하고 선반구축계의 동적특성을 검토하였다.

Prediction performances by Einstein's equation of diffusivity, Peskin's model, Three-Equation model, Four-Equation model and Algebraic Stress Model, have been compared by analyzing twophase (air-solid) turbulent jet flow. Turbulent kinetic energy equation of dispersed phase was solved to investigate effects of turbulent kinetic energy on turbulent diffusivity. Turbulent kinetic energy dissipation rate of particles has been considered by solving turbulent kinetic energy dissipation rate equation of dispersed phase and applying it to turbulent diffusivity of dispersed phase. Results show that turbulent diffusivity of dispersed phase can be expressed by turbulent kinetic energy ratio between phases and prediction of turbulent kinetic energy was improved by considering turbulent kinetic energy dissipation rate of dispersed phase for modelling turbulent diffusivity. This investigation also show that Algebraic Stress Model is the most promising method in analyzing gas-solid two phases turbulent flow.

키워드