대한기계학회논문집 (Transactions of the Korean Society of Mechanical Engineers)
- 제11권6호
- /
- Pages.982-990
- /
- 1987
- /
- 1225-5963(pISSN)
DOI QR Code
맥동 연소식 온수기의 모델링
Modeling of a pulse combustion water heater
- 발행 : 1987.11.01
초록
본 연구에서는 참고문헌(12)에서 배제된 머플러와 플래퍼밸브의 운동을 추가 시킴으로써 앞의 모델보다 실제장치에 근접시켜 보다 정확한 열적 및 동적거동을 예측 하고, 또한 컴퓨터 시뮬레이션의 수행시 계산시간을 줄여 정상운전상태의 결과를 얻고 자 한다.
In previous modeling of Helmholtz-type pulse combustion water heater, muffler and the motion of the flapper valve were omitted. In present work, these have been included in modeling for providing more accurate information regarding the thermal and dynamic behavior of the water heater. In addition, a computer simulation based on the modeling was developed. The comparison of computer predictions with available experimental data shows that the simulation is satisfactory in predicting the nature of operating behavior, amplitudes of the pressure oscillations, and the magnitude of the frequency. But the predicted time-averaged axial temperature of the flue gas along the flue tube length is somewhat below the previous experimental results. The temperature pulsation of the combustion chamber and the velocity pulsation of the flue gas were predicted which have never been measured in previous studies. In particular, the latter is of importance for a valid determination of the heat transfer enhancement due to the gas flow pulsation. Heat transfer results in flue tube were presented and discussed. Also the effects on the installation of the muffler were investigated.
키워드