A Study on the Special Purpose Control Chart for Non-normal Distribution

비정규분포공정(非正規分布工程)에서 특수관리도(特殊管理圖)의 적용연구(適用硏究)

  • 신용백 (아주대학교 공대 산업공학과) ;
  • 황의철 (한양대학교 공대 산업공학과)
  • Published : 1986.06.25

Abstract

Whereas in non-symmetrical distribution manufacturing process they are not plotted relatively on the centeral line but plotted on the skew of right-hand side or left-hand side. That is to say, for the prupose of producing either upper-specification-oriented items or lower-specification-oriented items, and when we carry out tighter control so as to have them pass only its specifications, the distribution shape naturally has a non-normal distribution. In these cases, we could use either compressed control limits or variable transformed logarithm control charts. It the above mentioned methods were not available, we should use special purpose control chart-Mode control chart or Gram-Charlier control chart. These are proper methods for manufacturing process control which uses control chart method. In spite of these methods, domestic manufacturing and mining companies are utterly ignorant about these methods. That invites practical problems in their companies. To enhance this improvements, I proved the property of practical applications of control chart method by comparing and analyzing the case studies of practical application of speical purpose control chart method, and also by introducing the application methods.

Keywords