대한의용생체공학회:의공학회지 (Journal of Biomedical Engineering Research)
- 제6권1호
- /
- Pages.37-46
- /
- 1985
- /
- 1229-0807(pISSN)
- /
- 2288-9396(eISSN)
도재소부용 Ni-Cr 보철합금 개발에 관한 연구
A Study on the Development of Porcelain Bonded Ni-Cr Dental Alloy
- Lee, Gyu-Hwan (Precision Metals Lab., KAIST) ;
- Sin, Myeong-Cheol (Precision Metals Lab., KAIST) ;
-
Choe, Bu-Byeong
(Dept. of Prosthokdontics, Kyung Hee University)
- 발행 : 1985.06.01
초록
Development of a dental Ni-Cr alloy system for porcelain veneering crown and bridge was studied in this research. The principles of alloy design were a) It should not contain toxic beryllium. b) It should have low melting Point. c) It should be easily ground and polished. d) It should possess an adequate strength to resist the deformational force In the mouth. e) It should be bondable Ivith porcelain by chemically. After investigating the effect of minor elements such as boron and rare earth metals on the mechanical properties of the Ni-Cr alloy system, the compromised ideal composition for dental use was determined. The composition was l9.6%, Cr, 5.6% Mo, 3.4% Si, 1, 0% Fe, 0.01% Ti, 0.5-1.0% B, 0.2-0.6% misch metal, balance Ni. To compare the performance of experimental alloy with commercially available alloys, the properties such as strength, melting point, and bond strength were measured. The results Ivere as follows: a) Boron increases the strength of the alloy but reduces the elongation. b) Misch metal increases the strength when the boron content is low, but does not increase the strength when boron content is high. And it reduces the elongation drastically, c) Mechanical strength of the experimental alloy was not superior to commercially available Be containing alloy, but handling performance such as castability, ease of granting and polishing, and cuttability were superior to the Be containing alloy.
키워드