종규칙파중(縱規則波中)에서의 선박(船舶)의 부가저항(附加抵抗) 계산(計算)

On the Added Resistance of a Ship in a Regular Head Sea

There have been many investigations of predicting the added resistance of a ship in seaway since Havelock discussed this topic in 1937. Among these researches, Maruo's theoretical approach is known as the most consistent mathematical representation for added resistance of a ship in regular head sea. In his theory, the hull form of a ship is represented under the slender body approximation. But the motion responses which were used for the calculation of the added resistance have been obtained by using the strip method which is based on an approximation that the hull form may be expressed as set of two dimensional cylinder sections in longitudinal direction. Therefore two different methods for hull form representation were implicity used in Maruo's original work for the added resistance calculation. Utilizing the characteristics that hull forms are usually slender, Kan expressed the hull form as two dimensional cylinder at each station by using the Taylor series expansion for the length wise direction. Putting this idea into Maruo's original work, the added resistance can be obtained with the explicitly unique representation of the hull form. For the purpose of comparison the added resistance of a hull form(series 60, Cb=0.6) was calculated by using the motion response obtained by Shintani. The numerical result showes a good qualitative agreement with the experimental result by Sibul.