액정 중합체 (제10보). 혼합폴리에틸렌 격자나 메소젠 단위를 갖고 있는 새로운 주사슬 혼성폴리에스테르의 합성 및 성질

Liquid Crystal Polymers (X). Synthesis and Properties of New Thermotropic Main Chain Copolyesters with Either Mixed Polymethylene Spacers or Mixed Mesogenic Units

  • Jung-Il Jin (Chemistry Department , Korea University) ;
  • Robert W. Lenz (Chemical Engineering Department, Materials Research Laboratory, University of Massachusetts) ;
  • S. Antoun (Faculty of Science, Department of Chemistry, University of Cairo)
  • 발행 : 1982.06.30

초록

새로운 혼성 폴리에스테르 4가지를 합성하여 액정성을 DSC 및 편광 현미경을 사용하여 조사, 연구하였다. 세가지 혼성 폴리에스테르는 같은 메소젠 단위를 갖고 있으나 폴리메틸렌 유연 격자중 메틸렌기 수가 기수-우수, 기수-기수 및 우수-우수의 조합으로 되어 있는점이 다르며, 또 하나의 혼성 폴리에스테르는 양단에 p-옥시벤조일기가 결합하고 있는 메틸-및 브로모히드로 퀴논 단위가 데카메틸렌 격자에 결합하고 있는 구조를 갖고 있다. 이들 폴리에스테르는 모두 녹는점 및 그 이상의 온도에서 네마틱 액정상을 형성함을 알았으며 네마틱${\to}$등방성 액체간의 상변환이 가역적으로 일어남을 DSC 및 현미경으로 관찰할 수 있었다. 액정${\to}$등방성액체의 상변환에 수반되는 열역학적 성질을 중합체의 구조와 관련시켜 고찰하였다.

Four new thermotropic copolyesters were prepared and their liquid crystal properties were investigated by differential scanning calorimetry and on a hot-stage of a polarizing microscope. Three copolyesters had same mesogenic unit, triad aromatic ester structure, interconnected through a random combination of either odd-even, or odd-odd, or even-even number of methylene groups in the polymethylene flexible spacers. Another random copolyester consisted of mesogenic units of 1 : 1 mixture of central methyl-and bromohydroquinone moieties with two flanking p-oxybenzoate units connected by decamethylene spacer. All of the polyesters formed nematic liquid crystal phase upon melting. The transitions for melting and nematic ${\to}$ isotropic transformations could be reversibly observed by DSC as well as by microscopic study. The thermodynamic properties for their liquid crystal ${\to}$ isotropic phase transitions were discussed in relation to their chemical structures.

키워드

참고문헌

  1. Brit. Polym. J. v.12 no.4 J.-I. Jin;S. Antoun;C. Ober;R. W. Lenz
  2. J. Polym. Sci., Polym. Chem. Ed. v.19 S. Antoun;R. W. Lenz;J.-I. Jin
  3. Macromolecules v.14 R. W. Lenz;J.-I. Jin
  4. Polym. J. (Japan) v.14 no.1 C. Ober;J.-I. Jin;R. W. Lenz
  5. Makromol Chem. Rapid Commun. v.3 B. W. Jo;R. W. Lenz;J.-I. Jin
  6. Europ. Polym. J. v.16 L. Strzelecki;D. van Luyen
  7. J. Polym. Sci., Polym. Phys. Ed. v.19 A. C. Griffin;S. J. Havens
  8. IUPAC MACROFROLENCE v.2 S. S. Skorokhodov;A. Yu. Bilibin;A. A. Shepelevsky;S. Ya. Frenkel
  9. Polymer v.5 no.6 J.-I. Jin
  10. Makromol. Chem. v.180 A. Roviello;A. Sirigu