Journal of the Korean Institute of Telematics and Electronics (대한전자공학회논문지)
- Volume 18 Issue 3
- /
- Pages.42-51
- /
- 1981
- /
- 1016-135X(pISSN)
High Efficiency Solar Cell(I)-Fabrication and Characteristics of $N^+PP^+$ Cells
고효율 태양전지(I)-$N^+PP^+$ 전지의 제조 및 특성
Abstract
Boron was predeposited into p (100) Si wafer at 94
결정방위 (100)인 단결정 P형 실리콘 기판으로 N+PP+ 태양전지를 제작하였다. 뒷면의 P+층의 형성은 940℃에서 60분간 boron nitride를 사용하는 첫번째 boron predeposition과 boron glass를 제거하지 않고 1145℃에서 3시간 동안 행하는 두번째 predeposition으로 이루어지며 boron 확산층의 어닐링은 1100℃에서 40분간 하였다. 앞면의 N+ 층의 형성은 900℃에서 7∼15분동안 POCI3 source를 사용하는 Phosphorus Predeposition으로 이루어지며 어닐링은 800℃에서 1시간 동안 dryO2분위기로 하였다 금속전극층의 형성은 Ti, Pd, Ag의 순으로 앞, 뒷면에 이들 금속들을 질공증착한 후 사진식각을 함으로써 이루어지며 이에 다시 전기도금을 하여 전체 전극층의 두께를 3∼4μm정도로 증가시켰다. 표면 광반사를 줄이기 위해 앞면에 400℃에서 silicon nitride를 입혔으며 마지막으로 550℃에서 10분간 alloy를 함으로써 금속전극의 신뢰도를 높혔다. 그 결과 제작된 면적 3.36㎠의 N+PP+ 전지들은 100mW/㎠의 인공조명하에서 단락전류 103mA, 개방전압 0.59V ,충실도 0.8을 보였다. 따라서 실제 전면적(수광면적)효율이 14.4%(16.2%)가 되어 BSF가 없는 N+P 전지의 11%전면적 변환효율에서 약3.5%의 효율이 개선되었다.
Keywords