중성자(中性子) 및 감마선(線)에 대한 선량율(線量率) 환산인자(換算因子) 계산(計算)

Calculation of Neutron and Gamma-Ray Flux-to-Dose-Rate Conversion Factors

  • 권석근 (한양대학교 공과대학 원자력공학과) ;
  • 이수용 (한양대학교 공과대학 원자력공학과) ;
  • 육종철 (한양대학교 공과대학 원자력공학과)
  • Kwon, Seog-Guen (Dept. of Nuclear Engr, College of Eng., Hanyang University) ;
  • Lee, Soo-Yong (Dept. of Nuclear Engr, College of Eng., Hanyang University) ;
  • Yook, Chong-Chul (Dept. of Nuclear Engr, College of Eng., Hanyang University)
  • 발행 : 1981.10.31

초록

This paper presents flux-to-dose-rate conversion factors for neutrons and gamma rays based on the American National Standard Institute(ANSI) N666. These data are used to calculated the dose rate distribution of neutron and gamma ray in radiation fields. Neutron flux-to-dose-rate conversion factors for energies from $2.5{\times}10^{-8}$ to 20 MeV are presented; the corresponding energy range for gamma rays is 0.01 to 15 MeV. Flux-to-dose-rate conversion factors were calculated, under the assumption that radiation energy distribution has nonlinearity in the phantom, have different meaning from those values obtained by monoetiergetic radiation. Especially, these values were determined with the cross section library. The flux-to-dose-rate conversion factors obtained in this work were in a good agreement to the values presented by ANSI. Those data will be a useful for the radiation shielding analysis and the radiation dosimetry in the case of continuous energy distributions.

키워드