A Study on the New Microstrip Magic Tee

새로운 형의 마이크로스트립 매직티에 관한 연구

  • Chang, IK Soo (Dept. of Electronic Eng., Sogang Univ.) ;
  • Kim, Jin Hun (Dept. of Electronic Eng., Sogang Univ.)
  • 장익수 (서강대학교 이공대학 전자공학과) ;
  • 김진헌 (서강대학교 이공대학 전자공학과)
  • Published : 1980.06.01

Abstract

A new coplanar Magic Tee has been formed, The H_arm Is made to have a parallel connection on the plane by using a microstrip and the I_arm is serially coupled by a cavity on the circuit mount and also by a gap formed on the microstrip ground plane. Open and shorted stubs are made to have maximum coupling at the gap of the I-arm, and 2 to 1 impedance matching trinsformers in the I and H-arms are designed to obtain 2nd order Chevyshev characteristics. The impedance matching characteristic on each arm is satisfactory : with VSWR less than 1.25, and the isolation between I and H arms less than -40 dB. These results are in good agreement with theoretical prediction.

마이크로스트?에 의하여 매직티를 평면상에 구성할 수 있는 방법을 제시한다. H-아암은 병렬회로로 구성되므로 직접 병렬구성을 하였으며, E-아암의 직각결합은 이 마이크로스트릴 회로 마운트에 공간을 형성하고 이 회로의 접지면에 겝을 이용하여 등지적으로 직렬결합이 되게 한다. 특히 E-아암의 겝에서 최대의 결합이 이루어지도록 개방 및 단락 스터브를 마이크로스트립으로 만들어 주었으며, 이때 E와 H-아암에 2:1이 되는 입퍼던스 정합기를 Chewshev 이계변환기로한 결과 S-Band에서는 각 아암에서 1.25보다 작은 VSWR을 얻었으며 분잡도는 -40dB 이하로써 이론치와 잘 일치하는 결과를 얻었다.

Keywords