Molecular Theory of Superplastic Deformation

초소성변형의 분자론

  • Chang Hong Kim (Department of Chemistry, Korea Advanced Institute of Science) ;
  • Taikyue Lee (Department of Chemistry, Korea Advanced Institute of Science)
  • Published : 1979.08.30

Abstract

The author's theory for plastic deformation was applied to superplastic alloys (Zn-Al eutectoid, Al-Cu, Pb-Sn, Sn-Bi, Mg-Al eutectics). The plastic deformation of the superplastic alloys could be described by two Maxwell models connected in parallel which represent two grain boundary flow units. The flow units are characterized by the two parameters $X_{gj}/{\alpha}_{gj}\;and\;{\beta}_{gj}$ (j=l or 2, g signifies the grain boundary) the values of which were obtained by applying our flow equation [Eq. (5)] to experiment. We confirmed that our flow equation describes the superplasticity very well. The curve of strain rate sensitivity m (=${\partial}\;In\;f/{\partial}\;In\;\dot{s})\;vs.\;-In\dot{s}$, where f and s are stress and strain rate, respectively, showed two peaks corresponding to flow unit gl and g2, the separation of the two peaks is determined by the difference between ${\beta}_{g1}\;and\;{\beta}_{g2}$. The condition of superplasticity is also determined by ${\beta}_{gj}$, which satisfies $\dot{s}_{mj}{\leqslant}1.53}{\beta}_{gj}$ [Eq.(13)], where $\dot{s}_{mj}$ is the s of the jth unit at the peak. The grain size dependence of ${\beta}_{gj}$ is described by $ln({\beta}_{gj})^{-1}$=alnx+b [Eq. (16)], where x is the grain size, and a and b are constants. The activation enthalpy for each flow unit, ${\Delta}H_{gj}^{\neq}$ was also determined from the temperature dependence of ${\beta}_{gj}$ which is proportional to the relaxation time of the j th unit. Since the superplasticity is determined by Eq. (13), and since ${\beta}_{gj}$ and ${\Delta}H_{gj}^{\neq}$ are related, we obtained the conclusion that superplasticity occurs in the system having small ${\Delta}H_{gj}^{\neq}$ values. The Aej values were equal to the activation enthalpies of grain boundary self-diffusion of the component atoms of the alloys, this accords with our proposed flow mechanism. The ${\Delta}H_{gj}^{\neq}$ value increases with grain size as expected from Eq. (16).

소성변형에 대한 著者들의 이론을 초소성합금(Zn-Al eutectoid, A1-Cu, Pb-Sn, Sn-Bi, Mg-Al eutectics)에 적용하였다. 그 결과 초소성합금의 소성변형은 두 개의 grain boundary流動單位의 平行連結로 나타낼 수 있었다. 이 두 개의 流動單位는 流動式에 나타나는 parameter $X_{gj}/{\alpha}_{gj}$${\beta}_{gj}$(j=1 혹온 2)로 表現할 수 있으며 이들을 實驗的으로 求할 수 있었다. 著者들의 流動式은 實驗과 잘 一致하였다. Strain rate sensitivity 對 -In(strain rate) 곡선을 이론으로 구한 결과 유동단위수만큼의 peak가 ${\beta}_{gj}$(j=1 or 2) 값에 따라 분리되어 나타났고 초소성의 조건도 ${beta}_{gj}$값에 의하여 결정됨을 알았다. ${\beta}_{gj}값의 粒子크기 依存性을 구하였고 온도변화에 따른 ${\beta}_{gj}$값 변화로부터 각 流動單位의 활성화엔탈피, ${\Delta}H_{gj}^{\neq}$도 구하였다. 그 결과 ${\Delta}H_{gj}^{\neq}$는 재료성분원소들의 grain boundary 자체확산에 의한 활성화엔탈피와 같이 나타났고 또 이들은 粒子 크기 증가에 마라 증가함을 보였다

Keywords

References

  1. J. Inst. Metals v.54 C.F. Pearson
  2. J. Metals v.14 E.E. Underwood
  3. Trans. Quart. A.S.M. v.57 W. A. Backofen;I. R. Turner;D. H. Avery
  4. J. Aust. Inst. Metals v.14 T.H. Alden
  5. Trans. Met. Soc. AIME v.239 R.C. Gifkins;K. U. Snowden
  6. Acta Met. v.21 M. F. Ashby;R. A. Verrall
  7. J. Korean Chem. Soc. v.21 C. H. Kim;T. Ree
  8. J. Chem. Phys. v.4 H. Eyring
  9. Mechanical Metallurgy(2nd Ed) G.E. Dieter
  10. Acta Met. v.23 F.A. Mohamed;T.G. Langdon
  11. Met. Trans. v.8A F. A. Mohamed;M.M.I. Ahmed;T. G. Langdon
  12. Trans. Met. Soc. AIME v.242 D. L. Holt
  13. Acta Met. v.23 H. Naziri;R. Pearce;M. Henderson Brown;K.F. Hale
  14. Trans. ASM v.58 D.H. Avery;W.A. Backofen
  15. Phil. Mag. v.32 F.A. Mohamed;T.G. Langdon
  16. Trans. ASM v.60 P.J. Martin;W.A. Backofen
  17. Trans. ASM v.59 D.L. Holt;W.A. Backofen
  18. Acta Met. v.17 D. Lee
  19. Acta Met. v.15 T.H. Alden
  20. Constitution of Binary Alloys M. Hansen
  21. Met. Trans. v.4 J.D. Lee;P. Niessen
  22. Trans. AIME v.209 S. K. Tung;R. Maddin
  23. Ph. D. Thesis,University of London P. A. Turner
  24. Acta. Met. v.2 B. Okkerse
  25. Phys. Stat. Sol v.2 W. Lang;D. Bergner
  26. Trans. Met. Soc. AIME v.239 H. E. Cline;T. H. Alden
  27. J. Mater. Sci. v.7 B. Baudelet;M. Suery
  28. Surfaces and Interfaces II: Physical and Mechanical Properties D.H. Avery;J.M. Stuart;J. J. Burke(ed.);N. L. Reed(ed.);V. Weiss(ed.)
  29. Ultafine-grain Metals J.W. Aldrich;D.H. Avery;J.J. Burke(ed.);V. Weiss(ed.)
  30. Met. Rev v.15 R. H. Johnson;R. B. Jhons;E. C. Sykes
  31. Phys. Stat. Sol. (a) v.21 R. Horiuchi;A. B. El-Sebai;M. Otsuka
  32. Trans. ASM v.59 L. P. Stark;W. R. Upthegrove