번커-C 重油의 性狀

Properties of Bunker-C Residual Oil

  • Hong Sung Taik (Department of Chemical Engineering, College of Engineering Pusan National Uni)
  • 발행 : 19670300

초록

For utilization of Bunker-C residual oil produced at KOCO., the auther tested the properties of vacuum fraction and blown asphalt, and as the result of it, (1) Vacuum fraction had so broad range of viscosity and high flash point that could be produced all kind of lublicating oil, but had to be dewaxed for high pour point, (2) Urea dewaxing was suitable to lighter fraction but not to heavier fraction, so, for heavier fraction, solvent dewaxing was needed. (3) Blown asphalt produced from vacuum residue had uniform relation between softening point and penetration in spite of broad change of blowing condition and adding of catalyst.

키워드

참고문헌

  1. Ind. Eng. Chem. v.24 P.J. Carisle;A.A. Cavine
  2. J. Inst. Pet. Tech. v.19 N. O. Backlund
  3. Rebiner v.12 C.F. Pester
  4. Rebiner v.36 A.S. Kontas
  5. Oil Gas J. v.33 W.A. Myex
  6. Rebiner v.15 W. P. Kiersted;B. Y. McCarty
  7. Rebiner v.12 F.X. Govers;G.R. Bryant
  8. Natural Petroleum News v.20 A.C. Foster
  9. Chem. Abst. v.62 no.3
  10. Chem. Abst. v.62 no.8
  11. J. Proc. 4th World Petroleum Congress v.3 Goppel. J. M.;Knotnerus
  12. J. Ind. and Eng. Chem. v.5 Hubberd P.;Reeve C. S.
  13. J. Ind. and Eng. Chem. v.9 Reeve, C. S.;Lewis. R. H
  14. J. Ind. and Eng. Chem. v.33 Thurston, R. R.;Knowlers, E. L.
  15. Proc. Assoc. Asphalt paving Tech. v.19 Hoiberg, A.J.