국제학술발표논문집 (International conference on construction engineering and project management)

한국건설관리학회 (Korea Institute of Construction Engineering and Management)
권호 표지
DOI QR코드

DOI QR Code

A Study on the Lower Shape of Double-curved and Polygonal Free-form Concrete Panel

  • Kyeongtae JEONG (Department of Architectural Engineering, Hanbat National University) ;
  • Chaeyeon YU (Department of Architectural Engineering, Hanbat National University) ;
  • Jongyoung YOUN (Department of Architectural Engineering, Hanbat National University) ;
  • Donghoon LEE (Department of Architectural Engineering, Hanbat National University)
  • 발행 : 2024.07.29
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

In previous research on the production of free-form concrete panel, most studies have focused on single-curved FCP. Additionally, research has primarily targeted square-shaped FCP rather than polygonal ones. However, when it comes to manufacturing double-curved polygonal FCPs, there is a concern about significant errors in the lower shape. double-curved FCP have multiple directions of curvature progression and frequent changes in surface curvature. Therefore, manufacturing double-curved polygonal FCPs can be challenging in terms of substructure implementation. This study thus investigates the substructure of double-curved polygonal FCPs. Specifically, it involves designing double-curved polygonal FCPs, implementing the corresponding shape in the LSM, and comparing it with the design shape. Experimental results showed significant shape errors in areas with abrupt curvature changes, and inevitable errors occurred in areas where there were previously no errors, despite three rounds of shape corrections. This study attributes these results to the elasticity of the LSM and limitations in deriving rod displacement values. Based on the experimental findings, the study outlines directions for future research. The results of this study are expected to serve as reference material for researchers and professionals in the field of FCP production. Additionally, they are anticipated to be actively utilized as foundational research data for subsequent studies.

키워드

과제정보

This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korean government (MSIT) (No. 2020R1C1C1012600).

참고문헌

  1. K. Jeong, M. Lee, J. Oh, D. Lee, "Development of Side Silicone Mold for Reducing Shape Error of Free-form Concrete Panel", buildings, vol. 13, no. 2, pp. 1-11, 2023.
  2. J. Yun, J. Youn, D. Lee, "Development of Connection Technology between Multi-Point Press and Flexible Mold for Manufacturing Free-Form Concrete Panel", buildings, vol. 12, no. 6, pp. 1-16, 2022.
  3. J. Youn, J. Yun, J. Kim, D. LEE, "Development of Variable Side Mold for Free-Form Concrete Panel Production", buildings, vol. 12, no. 6, pp. 1-10, 2022.
  4. J. Yun, J. Youn, D. Lee, "Development of Double-Sided Multipoint Press CNC and Operation Technology for Producing Freeform Molds", buildings, vol. 11, no. 10, pp. 1-11, 2021.
  5. S. Palikhe, J. J. Kim, J. Lim, S. Kim, "Systematic Analysis of Productionn Errors and Accuracy when using Pin-Bed Mold of Free-form Concrete Panels", KSCE Journal of Civil Engineering, vol. 22, no. 9, pp. 3196-3203, 2018.
  6. J. Lim, D. Y. Kim, S. Kim, "AN EXPERIMENTAL STUDY FOR QUALITY ASSURANCE OF FREE-FORM CONCRETE PANELS PRODUCED BY CNC MACHINE", Journal of Civil Engineering and Management, vol. 24, no. 2, pp. 145-154, 2018.
  7. J. W. Yu, J. Moon, "A Study on Classification of the Panelizing for Architectural Freeform Surface and the Optimization of Panelizing", Journal of the Korea Academia-Industrial cooperation Society, vol. 14, no. 9, pp. 4616-4626, 2013.
  8. J. H. Ock, J. S. Lim, "A Study on the Application of the Data Overlap Comparison Method to Enhance Construction Quality of the Free-Form Buildigns Facades", Design Convergence Study, vol. 11, no. 2, pp. 1-14, 2012.