Quality Control Techniques for Bare Concrete Floor Construction to Ensure Serviceability for Occupants

거주자 사용성 확보를 위한 콘크리트 맨바닥 시공 품질 관리 기법

  • 목지욱 (롯데건설(주), 기술연구원 소음진동솔루션TFT) ;
  • 최경석 (롯데건설(주), 기술연구원 소음진동솔루션TFT) ;
  • 김정진 (롯데건설(주), 기술연구원 소음진동솔루션TFT) ;
  • 석원균 (롯데건설(주))
  • Published : 2023.11.10

Abstract

The pre-qualification system related to floor impact noise is considered ineffective, and thus, the introduction of a post-verification system is being prepared. This is because the performance, which was notarized in the qualification test due to various reasons, was not uniformly confirmed on building construction fields. Industry practitioners perceive that this is due to the influence of factors such as the flatness, levelness and/or thickness of the floor. However, it is very difficult to confirm such facts in a short period of time on the fields, and since the practical application of technology to measure and evaluate quantitatively and the establishment of a system are insufficient, it cannot be said to be a problem that can be brought to the surface. In fact, even when considering the conventional measurement of the dynamic modulus of elasticity, measurements are performed under controlled variables, such as placing a 200mm×200mm buffer material on a flat test-floor. However, in the fields, it is common to lay down larger productions(for example, 900mm×600mm) on the bare floor where significant variables are not controlled, and to construct finishing layers corresponding to the pre-qualified floor system without separately confirming the realization of the dynamic modulus of elasticity in the field conditions. In this study, spatial information of the bare floor on the field was measured and evaluated through a laser scanner. Technical methods for assessing the smoothness, flatness, and thickness of construction surfaces were reviewed, providing key insights for grading the quality of construction based on these criteria. Through further detailed and thorough investigations, it is expected that results suitable for practical application and systematization will be derived.

Keywords

References

  1. 감사원. 아파트 층간소음 저감제도 운영실태 특정감사 보고서. 2019.
  2. ASTM International. Standard Method for Determining FF Flor Flatness and FL Floor Levelness Numbers (ASTM E1155-20). 2020.
  3. MathWorks. https://kr.mathworks.com.2023a.