PDMS 몰드 기반의 선택적 파단 위치 제어가 가능한 캡슐 제작 공정 개발

Development of capsule fabrication process that can control selective fracture location based on PDMS mold

Recently, research on the self-healing of concrete using bacteria has been actively conducted. The self-healing method using bacteria has a low self-healing rate and the surrounding environment of the fracture site is very important. A previous study to solve this problem involves the manufacture of capsules using 3D printing. Fracture position control was an important topic in 3D printing-based capsules. In this study, to compensate for the shortcomings of existing studies, a capsule capable of selective destruction location control was produced using PDMS-based molds that are not restricted by the environment. Resin capsules were prepared for each part using several molds and a bonding surface was arranged. In order to verify this on the bonding surface, fracture strength and wave unit values were analyzed through a three-way compression experiment. It can be seen that as the curing time increases, the deviation between samples decreases. In addition, through experiments, it was confirmed that the junction surface and wave unit values coincide in all three directions. It can be used for self-healing research using various solutions.