Effects of waste glass aggregate on thermal behavior of fly ash alkali activated mortar

  • Sasui, Sasui (Department of Architectural Engineering, Chungnam National University) ;
  • Kim, Gyu Yong (Department of Architectural Engineering, Chungnam National University) ;
  • Pyeon, Su Jeong (Department of Architectural Engineering, Chungnam National University) ;
  • Eu, Ha Min (Department of Architectural Engineering, Chungnam National University) ;
  • Lee, Yae Chan (Department of Architectural Engineering, Chungnam National University) ;
  • Nam, Jeong Soo (Department of Architectural Engineering, Chungnam National University)
  • Published : 2022.04.20

Abstract

This study incorporates fine waste glass (GS) as a replacement for natural sand (NS) in fly ash (FA) based alkali activated mortar (AAm). AAms were heated at elevated temperature of 200℃, 400℃, 600℃, and 800℃ to explore the residual mass, compressive strength, thermal expansion and change in microstructure of matrix. Results showed greater resistance of AAms with increasing GS content to 50% at each temperature. Owing to the melting of GS at 800℃, the greater matrix bond was observed for AAm incorporating 75% and 100% GS as a result, the residual compressive strength was increased.

Keywords

Acknowledgement

이 논문은 정부(과학기술정보통신부)의 재원으로 한국연구재단의 지원을 받아 수행된 연구임(No. 2019R1A2C2085867).