A Study on Design of Microstrip Patch Antenna for Mobile Communication Systems using IE3D

IE3D를 이용한 단일 급전 이동통신용 마이크로스트립 패치 안테나 설계에 관한 연구

  • Park, Jong-Dae (School of Computer, Information, and Communication Engineering, Sangji University) ;
  • Park, Byeong-Ho (School of Computer, Information, and Communication Engineering, Sangji University) ;
  • Shim, Woo-Seop (School of Computer, Information, and Communication Engineering, Sangji University) ;
  • Kim, Myeong-Dong (School of Computer, Information, and Communication Engineering, Sangji University) ;
  • Seong, Hyeon-Kyeong (School of Computer, Information, and Communication Engineering, Sangji University)
  • 박종대 (상지대학교 컴퓨터정보공학부) ;
  • 박병호 (상지대학교 컴퓨터정보공학부) ;
  • 심우섭 (상지대학교 컴퓨터정보공학부) ;
  • 김명동 (상지대학교 컴퓨터정보공학부) ;
  • 성현경 (상지대학교 컴퓨터정보공학부)
  • Published : 2012.10.26

Abstract

In this paper, a novel particle swarm optimization method based on IE3D is used to design a mobile communication Microstrip Patch Antenna. The aim of the thesis is to Design and fabricate an inset fed rectangular Microstrip Antenna and study the effect of antenna dimensions Length (L), Width (W) and substrate parameters relative Dielectric constant (${\varepsilon}r$), substrate thickness on Radiation parameters of Band width. When the antenna was designed, a dual-band, dual-polarized antenna was used to secure the bandwidth and improve performance, and a coaxial probe feeding method so that the phased array of antenna is easy.

본 논문에서는 IE3D를 기반으로 하는 새로운 PSO를 사용해 이동통신용 마이크로스트립 패치 안테나를 설계하였다. 본 논문의 목적은 이동통신용 급전 사각형 마이크로스트립 안테나를 설계하고, 대역폭의 복사 매개변수에 대한 안테나 크기(길이, 폭) 및 기판 매개변수 상대 유전 상수(${\varepsilon}r$), 기판 두께의 영향을 연구하여 이동통신용에 적합한 안테나를 설계하는 것이다. 안테나 설계 시 대역폭 확보 및 성능 향상을 위해 이중대역 이중 편파 안테나를 사용하였고, 안테나 위상 배열이 용이 하도록 단일 급전 방식을 사용하였다.

Keywords