A Study on the Reduction of Building Energy Consumption and Generation of BIPV System According to the Increase of the Number of Floors in Office Building
사무소건물 층수 증가에 따른 BIPV 발전량과 건물에너지소비량 저감에 관한 연구
- Oh, Myung-Hwan (Dept. of Architecture Engineering, Graduate School, Hanbat National University) ;
- Yoon, Jong-Ho (Dept. of Architecture Engineering, Hanbat National University) ;
-
Shin, Woo-Cheol
(Dept. of Architecture Engineering., Daejeon University)
- Published : 2011.04.07
Abstract
BIPV system that can alternate building envelope by making materials of PV module should be considered in initial design step for applying PV system efficiently in office building. Mean while, area of the building skin also increases as the number of floors increases, but the valid area that can apply BIPV system in effect decreases relatively. Despite of this weak point, installing BIPV system is still being evaluated as the only measure left that can reduce electronic energy consumption in the building. Therefore, the impact on building energy consumption according to the increase of the number of floors when BIPV system is applied in the building was analyzed. And it will be used as basic information for application of BIPV in office building. Conomic about application of BIPV is interpreted to be secured within the 10 story high. Forover the 11 floors, the methods of increasing the contribution ratio produced by BIPV system through the optimization of install angle and increase in install area of south, high efficiency should be considered. The ways to reduce basic load by integrated design with another renewable energy besides BIPV should be found. Later, the study on the total building energy comsumption with PV generation according to the various type of the basic load and ratio of the width and depth will be performed based on this study.