A Study on the development of transfer system of cutting punched pipes.

타공파이프 절단을 위한 이송시스템 개발에 관한 연구

  • 박진석 (울산대학교 기계자동차공학과) ;
  • 윤두환 (울산대학교 자동차선박대학원) ;
  • 정찬세 (울산대학교 기계자동차공학과) ;
  • 김용석 (울산대학교 기계자동차공학과) ;
  • 양순용 (울산대학교 기계자동차공학부)
  • Received : 2010.06.07
  • Published : 2010.06.18

Abstract

A punched pipe in a muffler for an automobile has many important variables, like location of holes in the pipe and length of the pipe related to noise reduction of a diffuser. This pipe is cut depending on length of product and this process, generally workers cut pipes by hands. In this process, there are many errors and it relies on the skill of workers, so it can happen that cycle time for complete product gets long and productivity gets low. Therefore, we need a vision system to distinguish holes in the punched pipe and a transfer system to set the cutting position automatically by moving the pipe depending on forward and backward part of the holes. This paper explains the development of an automatic transfer device which will cause the beating pipe to be cut correctly, exactly the same length as the product.

Keywords