An Experimental Study of The Effect of Injection-only and Injection/Compression on The Birefringence Structure in Transparent Disks

사출 및 사출/압축이 투명 디스크의 복굴절 분포에 미치는 영향에 관한 실험적 연구

Recently, injection/compression molding process became more popular than ever to produce many transparent optical products of high precision. Especially, optical disk for read/write is the best example. But those optical disks can cause sensorial problems because of high birefringence or deformation from the residual stresses in the media. Therefore, it is necessary to study the effects of various process conditions on the final birefringence structure in injection-only and injection/compression molded disks for producing precision injection-molded products. In the present paper we have focused on the effect of injection, holding and compression processes on the optical anisotropy(i.e. birefringence) remaining in the MOD by examining the gapwise distribution of birefringence and extinction angle. The effect of holding pressure was found to form the inner two birefringence peaks. But the effect of compression pressure on the birefringence distribution was found to make the uniform distribution near the center in the gapwise direction and inversion of extinction angle far from the gate.