Numerical Simulation on the Effect of the Land Coverage Change on the Urban Heat Budget

토지피복 변화가 도시열수지에 미치는 영향에 관한 수치시뮬레이션

  • Kim, Sang-Ok (School of Architecture, Pusan National University) ;
  • Yeo, In-Ae (Dept. of Architectural Eng., Pusan National University) ;
  • Ha, Kyung-Min (Research Institute of Industrial Technology, Pusan National University) ;
  • Yee, Jurng-Jae (Faculty of Architectural Design and Engineering, Dong-A University) ;
  • Yoon, Seong-Hwan (School of Architecture, Pusan National University)
  • 김상옥 (부산대학교 대학원 건축학과) ;
  • 여인애 (부산대학교 대학원 건축공학과) ;
  • 한경민 (부산대학교 생산기술연구소) ;
  • 이정재 (동아대학교 건축학부) ;
  • 윤성환 (부산대학교 건축학부)
  • Published : 2009.04.10

Abstract

In this study, Urban Climate Simulation was performed using 3-Dimensional Urban Canopy Model. The characteristics of urban thermal environment was analyzed by classifying land coverage and increasing natural land coverage ratio. The results are as follows. The characteristics of the land coverage on urban thermal environment formation can be summarized by the effects like higher temperature on the artificial coverage, and the contrary effects on the natural coverage. When the water coverage 100% was made up, maximum temperature was declined by $5.5^{\circ}C$, humidity by the 6.5g/kg, wind velocity by 0.6m/s, convective sensible heat by $400W/m^2$ and the evaporative latent heat was increased by $370W/m^2$ compared to when artificial coverage 100% was formed. These simulation results need to be constructed as DB which shows urban quantitative thermal characters by the urban physical structure. These can be quantitative base for suggesting combinations of the building and urban planning features at the point of the desirable urban thermal environment as well as analysing urban climate phenomenon.

Keywords