Proceedings of the IEEK Conference (대한전자공학회:학술대회논문집)

The Institute of Electronics and Information Engineers (대한전자공학회)
권호 표지

Effect of the Addition of CuO and MgO on the magnetic characteristics of Mg-ZnFerrite

CuO 및 MgO 첨가가 Mg-Zn Ferrite의 자기적 특성에 미치는 효과

  • Lee, Joon-Mo (Department of Electronics & Information Communication Engineering Kwandong University) ;
  • Choi, Kyu-Man (Department of Electronics & Information Communication Engineering Kwandong University) ;
  • Gwon, Hyeok-Sang (Department of Electronics & Information Communication Engineering Kwandong University) ;
  • Lee, Yun-Sik (Department of Electronics & Information Communication Engineering Kwandong University) ;
  • Lee, Ho-Jin (Department of Electronics & Information Communication Engineering Kwandong University) ;
  • Lee, Sang-Hun (Department of Electronics & Information Communication Engineering Kwandong University)
  • 이준모 (관동대학교 전자공학과) ;
  • 최규만 (관동대학교 전자공학과) ;
  • 권혁상 (관동대학교 전자공학과) ;
  • 이윤식 (관동대학교 전자공학과) ;
  • 이호진 (관동대학교 전자공학과) ;
  • 이상훈 (관동대학교 전자공학과)
  • Published : 2008.06.18
Download PDF
⟨ Previous Next ⟩

Abstract

The magnetic characteristics of Mg-Zn ferrite that was fired at $1150^{\circ}C$ for 1hour and sintered at $1250^{\circ}C$ for 3hours was examined. The composition ratio of the ferrite was changed after sintering. In that case the composition ratio of ${Fe_2}{O_3}$ was increased but that of CuO was decreased. When the addition quantity of CuO was 3.8 mole%, it's shrinkage rate had maximum value. Magnetic permeability was decreased as the addition rate of CuO was increased and MgO was decreased. When the composition rate of CuO was 2.3 mol% and MgO was 10.9 mol%, the firing density had maximum value. In case that CuO was 2.8mol% and MgO was 10.4mol%, PL had minimum value.

Keywords