The Experimental Study on the Properties on Concrete to use the Electric Arc Furnance Slag as Fine Aggregate

전기로슬래그 잔골재를 사용한 콘크리트의 기초물성에 관한 실험적 연구

  • 최성우 (유진기업(주) 기술연구소) ;
  • 김정식 (유진기업(주) 품질지원팀, 친환경소재제품인력양성센터(EMEC)) ;
  • 전준영 (유진기업(주) 연구개발팀) ;
  • 김은겸 (서울산업대학교 토목공학과, 친환경소재제품인력양성센터(EMEC)) ;
  • 류득현 (유진기업(주) 기술연구소)
  • Published : 2008.11.07

Abstract

Electric-furnace-slag has the expansion, due to the reaction with water and free Cao. So compared with the blast-furnace-slag, the recycling range of EFS is subject to restriction. But the expansive reaction of EFS is removed, the it is possible to use aggregate for concrete. This study is the basic properties of concrete to used stabilized EFS(oxidized EFS). The EFS is used fine aggregate in concrete, and replaced by sea-sand(natural sand). The replacement ratio are 0%, 25%, 50%, 75%, 100%. The result of study, to used oxidized EFS-sand, the flowability and the compressive strength is increased. Also it is possible to reduce the Bleeding. It is necessary more study about using the EFS aggregate, like the durability, the mechanical property for concrete

철강 산업에서 발생되는 슬래그 부산물 중 전기로슬래그는 슬래그 자체의 팽창반응성으로 인해 콘크리트용 원자재로서 활용이 불가능하지만, 슬래그의 팽창반응성을 제거한 전기로산화슬래그는 콘크리트용 골재로서 활용이 가능하다. 본 연구에서는 산화 전기로슬래그 잔골재를 사용한 콘크리트의 기초품질 특성을 검토한 것으로서, 산화 전기로슬래그 잔골재는 입형이 둥근 풍쇄전기로슬래그 및 입형이 부순모래와 유사한 파쇄 전기로슬래그 잔골재가 있으며, 본 실험에서는 파쇄 전기로슬래그 잔골재를 사용하였다. 잔골재에 대해 용적 대체한 경우에서의 콘크리트의 품질 특성을 검토 결과, 전기로슬래그 잔골재는 골재 자체의 밀도가 일반 천연골재에 비해 매우 높고, 흡수율이 매우 낮기 때문에 전기로슬래그 잔골재 대체율이 증가할수록 동일 유동성을 확보하는 단위수량은 감소하는 경향을 나타내고 있으며, 동일 단위수량 적용시에도 콘크리트의 강도 발현 특성은 증가하는 경향을 나타내고 있다.

Keywords