Proceedings of the Korean Society for Technology of Plasticity Conference (한국소성가공학회:학술대회논문집)
- 2007.05a
- /
- Pages.357-360
- /
- 2007
Process Design for Profile Ring Rolling of Ti-6Al-4V Alloy
Ti-6Al-4V합금의 형상 링 압연 공정설계
- Yeom, J.T. ;
- Kim, J.H. ;
- Lee, D.G. ;
- Park, N.K. ;
- Choi, S.S. ;
- Lee, C.S.
- 염종택 (한국기계연구원 재료기술연구소) ;
- 김정한 (한국기계연구원 재료기술연구소) ;
- 이동근 (한국기계연구원 재료기술연구소) ;
- 박노광 (한국기계연구원 재료기술연구소) ;
- 최승식 ((주) 태웅) ;
- 이종수 (포항공과대학교 신소재공학과)
- Published : 2007.05.10
Abstract
The profile ring rolling process of Ti-6Al-4V alloy was designed by finite element(FE) simulation and experimental analysis. The design includes geometry design and optimization of process variables. The geometry design such as initial billet and blank sizes, and final rolled ring shape was carried out with the calculation method based on the uniform deformation concept between the wall thickness and ring height. FEM simulation was used to calculate the state variables such as strain, strain rate and temperature and to predict the formation of forming defects during ring rolling process. Finally, the mechanical properties of profiled Ti-6Al-4V alloy ring product were analyzed with the evolution of microstructures during the ring rolling process.
Keywords