Experimental and numerical study on viscoelastic behavior of polymer during hot embossing process

핫엠보싱 공정의 폴리머 점탄성 거동에 대한 연구

  • 송남호 (서울대학교 기계항공공학부) ;
  • 손지원 (서울대학교 기계항공공학부) ;
  • 임성한 (한국기술교육대학교 기계정보공학부) ;
  • 오수익 (서울대학교 기계항공공학부)
  • Published : 2007.05.10

Abstract

In hot embossing lithography which has shown to be a good method to fabricate polymeric patterns for IT and bio components, it is very important to determine the proper process conditions of pressure, temperature, and time. It is also a key factor for predicting the optical properties of final product to calculate residual stress distribution after the embossing process. Therefore, to design the optimum process with right conditions, the ability to predict viscoelastic behavior of polymer during and after the hot embossing process is required. The objective of the present investigation is to establish simulation technique based on constitutive modeling of polymer with experiments. To analyze deformation behavior of viscoelastic polymer, the large strain material properties were obtained from quasi-static compression tests at different strain rates and temperatures and also stress relaxation tests were executed. With this viscoelastic material model, finite element simulation of hot embossing was executed and stress distribution is obtained. Proper process pressure is very important to predict the defect and incomplete filling.

Keywords