대한용접접합학회:학술대회논문집 (Proceedings of the KWS Conference)
- 대한용접접합학회 2006년도 춘계 학술대회 개요집
- /
- Pages.304-306
- /
- 2006
가접부를 고려한 필릿 용접조건의 선정에 관한 연구
A Study on the Selection of Fillet Weld Conditions by Considering the Tack Welds
- 발행 : 2006.05.01
초록
Positioning the workpiece accurately and preventing the weld distortion, tack welding is often performed before main welding in the construction of welded structures. The weld bead size of the tack weld is determined according to the workpiece thickness, weld length, weld joint type etc. However, this tack weld deteriorates the final weld bead profile, so that the grinding process is usually adopted for the uniform weld bead profile. In this study, an experimental method for the selection of optimal welding condition was proposed in the fillet weld which was done over the tack weld. This method uses the response surface analysis in which the leg length and the reinforcement height of weld bead were chosen as the quality variables of weld bead profile. The overall desirability function, which was combined desirability function for the two quality variables, was used as the objective function for getting the optimal welding condition. From the result, it was revealed that a uniform weld bead can be obtained by adopting the optimal welding condition which was determined according to the method proposed.
키워드