The Study of noise and vibration on application of the method breaking & excavating rock(Super wedge)

암파쇄굴착공법(Super wedge) 적용에 따른 소음.진동에 대한 고찰

There is cattle shed and house structure of a country village in the vicinity of the construction site. that is why the environmental effect evaluation on blasting had been done in advance to prevent any harm to those from the work. As the result, it is impossible to apply to the blasting method, and the Super wedge method, a kind of a rock-splitting method which there is no secondary breaking by a breaker of the methods breaking &excavating rock according to the classification of the blasting method by the ministry of construction & transpotation, applied to decrease noise and vibration, and to the work classification, the extent of noise and vibration measured with the instrument only for noise(SC-310c) and with the instrument only for vibration(BLASTMATE) respectively. A drilling, splitting, collecting, loading works at the closest point(about 10m) is barely possible on the consideration of vibration to the result of measurement, but carefulness needs on moving of equipment. On the case of noise, even drilling, collecting, loading work except splitting at the comparatively close point(about 20m) is difficult. So, the method breaking &excavating rock according to the classification of the blasting method by the ministry of construction & transpotation has to apply in consideration of noise level in accordance with the work processing.

본 연구는 굴착대상구역에 축사 및 마을주택구조물이 근접위치하고 있어 이들 시설물에 대한 피해 방지를 위해 사전 발파환경영향평가를 실시하였다. 그 결과 발파공법의 적용이 불가하여 소음과 진동저감을 위해 건교부의 발파공법분류에 의한 암파쇄굴착 공법 중, 브레이커에 의한 2차 파쇄가 없는 할암공법의 일종인 슈퍼웨찌(Super wedge) 공법을 적용하였으며, 작업 공종별로 소음전용측정기(SC-310c)와 진동전용측정기 (BLASTMATE)를 이용하여 소음과 진동의 크기를 측정하였다. 측정결과 진동을 기준하면 최근접(약 10m) 위치에서 천공, 절개, 집토 및 상차작업은 가능하나 장비이동이 고려되어야 하며, 소음을 기준하면 절개작업을 제외하고 천공, 집토 및 상차작업은 20m 이내에서도 굴착작업 자체가 어려운 것으로 나타났다. 따라서 건교부 발파공법분류에 의한 암파쇄굴착공법은 작업과정별 소음도를 감안하여 적용되어야 한다.