Design of Moving Coil Type Optical Pickup Actuator for Flexible Disk

유연디스크용 가동 코일형 광 픽업 엑추에이터 개발

  • 김윤기 (연세대학교 정보저장기기연구센터) ;
  • 송명규 (연세대학교 정보저장기기연구센터) ;
  • 이동주 (연세대학교 정보저장기기연구센터) ;
  • 박노철 (연세대학교 정보저장기기연구센터) ;
  • 박영필 (연세대학교 기계공학과)
  • Published : 2006.11.16

Abstract

As high-definition television(HDTV) broadcasting were generalized, there have been many researches and developments about large storage capacity and fast data transfer rate in optical disk drives(ODD). Pickup actuators must have high flexible mode frequencies and gain margins. Flexible modes are caused by the flexibility of moving parts in the actuator and a servo bandwidth is limited by them. As a result, the system becomes unstable for high-speed operations in high density reading and recording. In this paper, we suggest improved modeling method that considers the bonding layer. And, flexible mode frequency of actuator is improved by Design of Experiment of lens holder. Magnet circuit is designed considering the relation with moving part. Through improving yoke design, the magnetic flux is changed and DC tilt is reduced. Consequently, we designed actuator which has high flexible mode frequency and gain margins.

Keywords