Proceedings of the IEEK Conference (대한전자공학회:학술대회논문집)
- 2005.11a
- /
- Pages.773-776
- /
- 2005
Fabrication of Blue OLED with GDI Host and Dopant
GDI Host-Dopant를 이용한 청색 유기발광다이오드의 제작
-
Jang, Ji-Geun
(Department of Electronics Engineering, Dankook University)
;
- Shin, Se-Jin (Department of Electronics Engineering, Dankook University) ;
- Kang, Eui-Jung (Department of Electronics Engineering, Dankook University) ;
- Kim, Hee-Won (Department of Electronics Engineering, Dankook University) ;
- Seo, Dong-Gyoon (Department of Electronics Engineering, Dankook University) ;
- Lim, Yong-Gyu (Department of Electronics Engineering, Dankook University) ;
-
Chang, Ho-Jung
(Department of Electronics Engineering, Dankook University)
-
장지근
(단국대학교 전자공학과)
;
- 신세진 (단국대학교 전자공학과) ;
- 강의정 (단국대학교 전자공학과) ;
- 김희원 (단국대학교 전자공학과) ;
- 서동균 (단국대학교 전자공학과) ;
- 임용규 (단국대학교 전자공학과) ;
-
장호정
(단국대학교 전자공학과)
- Published : 2005.11.26
Abstract
In the fabrication of high performance Blue organic light emitting diode, 2-TNATA[4,4',4"-tris(2-naphthylphenyl-phenylamino)-triphenylamine] as hole injection material and NPB[N,N'-bis(1-naphthyl)-N,N'-diphenyl-1,1'-biphenyl-4,4'-diamine] as hole transport material were deposited on the ITO (Indium Tin Oxide)/Glass substrate by vacuum evaporation. And then, Blue color emission layer was deposited using GDI602 as a host material and GDI691 as a dopant. Finally, small molecule OLED with the structure of ITO/2-TNATA/NPB/GDI602+GDI691/Alq3/LiF/Al was obtained by in-situ deposition of Alq3, LiF and Al as electron transport material, electron injection material and cathode, respectively. Blue OLED fabricated in our experiments showed the color coordinate of CIE(0.14, 0.16) and the maximum luminescence efficiency of 1.06 lm/W at 11 V with the peak emission wavelength of 464 nm.
Keywords