A Piezoelectric Lens Actuator for Mobile Information Devices

모바일 기기용 렌즈 구동 압전형 액츄에이터 개발

  • 이훈태 (서강대학교 기계공학과 대학원) ;
  • 이승엽 (서강대학교 기계공학과) ;
  • 박영필 (연세대학교 기계공학과)
  • Published : 2005.11.01

Abstract

In this paper, a lens actuator for mobile devices is proposed using stack type piezoelectric materials. In general, the deformation of PZT actuators is not enough for lens motion when the allowed voltage is applied. The small stroke problem can be solved by accumulating a lot of small displacements in high frequency. In this paper, a new inch-worm type model for focusing actuator is suggested based on the interaction of inertial and frictional forces. Theoretical analysis and simulation using ANSYS are performed to verify the feasibility of the inch-worm PZT actuator model. Various types of clamps are considered to determine the effect of frictional force on the motion, and appropriate clamp-actuator models are proposed. The proposed models are experimentally verified and the experimental results show high correspondence with theoretical and simulated values. The inch-worm type focusing actuator enable a large stroke with 7.79 mm/sec with 10kHz and 10V.

Keywords