하향식 가스화 장치를 이용한 바이오매스로부터의 합성가스 생산

Fuel Gas Production from a Down-draft Gasifier using Bionass

Syngas or fuel gas production through biomass gasification is a century old technology. Biomass gasification is getting more and more interest recently as one of competitive renewable energy technologies. It does not contribute to increasing greenhouse gases(GHG). A down-draft gasifier was designed and tested for syngas quality using different fuel sets in this study. The gasifier was of about 100kW capacity. Tests were conducted at air flow rates ranging from 10 to $60m^3/hr$. Fuels tested included wood chips and wood char. The results showd that gas quality in terms of flammability was reasonably good when the temperatures were over $600^{\circ}C$ inside the gasifier. Although $800^{\circ}C$ or higher is recommended, gas quality was reasonably good. If insulation was provided outside the gasifier, the temperature would increase. When wood chips were used, the temperature was below $600^{\circ}C$ and gas quality was not good. It seemed that calorific values of fuel and height of reduction zone in the gasifier are very important. The results of the tests would provide important information for designing more improved gasifier and its operation.