Dynamic Walking Planning for a Legged Moving Machine

보행형 이동 로봇의 동적 걸음 계획

  • Yu S.H. (Mechanical. Eng. Dept. CNU) ;
  • Kim J.H. (Mechanical Eng. Dept., CNU) ;
  • Kim Y.B. (Mechanical Eng. Dept., CNU)
  • 유승환 (전남대학교 기계공학과 대학원) ;
  • 김정훈 (전남대학교 기계공학과 대학원) ;
  • 김영배 (전남대학교 기계공학과)
  • Published : 2005.06.01

Abstract

In this paper ZMP was considered in order to get a walking stability, so the gait in the stable domain was realized through putting the stability margin in the sole domain of a foot. It is assumed that the robot's legs have 12 joints to operate a open-loop drive and there was no external disturbance under walking phases, additionally, the robot is walking on the flat plane. It was observed that the robot's walking trajectory, locus of COM and ZMP after imposing the motion to each joint. For realizing the simulation considering ZMP and movement of mass center, it was checked if it is stable for the constraint robot model to walk in stability and the feasibility was estimated about its dynamic gait. Eventually it was shown that a constraint gait algorithm is able to realize. To verify the proper walking process, ZMP(Zero Moment Point) theory is applied and the simulation has been done by ADAMS.

Keywords