Building of Navigation Guiding System for Small Ships

소형선박의 항해가이딩시스템 구축

  • Published : 2005.10.28

Abstract

Marine accidents of 70.9% have been caused by small ships less than 100 tons in the past 5 years(1998${\sim}$2002). This is ascribable to the graying and lack in expertise on shipping of small ship operators, and merchant ships are hindered from coastal navigation due to the increase of coastal fishing boats and liners. Currently, ECDIS and GPS Plotters are widely used as navigation equipment providing route information to operators, but it can not give any function of automatic route creation and route explanation, so they are available only experienced operators. Especially, the present situation is that no study is made of the automatic route creation and route explanation using ENC for ECDIS, substitution system of paper chart. In this paper, Navigation Guiding System(NGS) is proposed to generate an optimal route where ENC and GPS data is fusioned including the wind speed and direction of anemometer. The proposed system was testified by a simulation, and its effectiveness was verified.

지난 5년간(1998${\sim}$2002년) 우리나라에서 발생한 해양사고를 살펴보면 100톤 미만의 소형어선이 70.9%를 차지하고 있다. 이것은 소형선박 항해사의 고령화와 선박운항에 관한 전문지식을 결여에 기인한다고 볼 수 있으며, 상선의 경우 연안어선 및 통한선의 증가로 연안항해에 지장을 받고 있는 실정이다. 이러한 상황에서 외부상황을 육안으로 관찰하면서 항해에 필요한 상황을 언어적 표현에 의해 가이딩 받을 수 있다면 항해 안전에 큰 도움이 될 것이다. 현재 선박에서 항해사에게 항로정보를 제공하는 장비는 ECDIS와 GPS 플로터가 많이 사용되고 있으나 자동항로생성 및 항로설명기능이 없어 숙련된 항해사만 사용할 수 있는 문제가 있으며, 특히 종이해도의 대체 시스템인 ECDIS에 사용되는 ENC를 이용한 자동항로생성 및 항로설명에 관한 연구는 없는 실정이다. 본 논문에서는 ENC의 해도데이터와 GPS의 위치데이터, 풍속${\cdot}$풍향계의 풍속${\cdot}$풍향데이터를 이용하여 현 위치에서 목적지까지의 최적항로를 설계하여 안내해주는 항해가이딩시스템을 구축하였고, 시뮬레이션을 통하여 유효성을 확인하였다.

Keywords