한국전기전자재료학회:학술대회논문집 (Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference)
- 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
- /
- Pages.309-310
- /
- 2005
Rubrene/GDl 4234 Dual 도펀트를 이용한 적색 유기발광다이오드
Red Organic LED with Dual Dopants of Rubrene and GDI 4234
- 장지근 (단국대학교 전자공학과) ;
- 강의정 (단국대학교 전자공학과) ;
- 김희원 (단국대학교 전자공학과) ;
- 신세진 (단국대학교 전자공학과) ;
- 공명선 (단국대학교 화학과) ;
- 임성규 (단국대학교 전자공학과) ;
- 오명환 (단국대학교 전자공학과)
- Jang, Ji-Geun (Department of Electronics Engineering, Dankook University) ;
- Kang, Eui-Jung (Department of Electronics Engineering, Dankook University) ;
- Kim, Hee-Won (Department of Electronics Engineering, Dankook University) ;
- Shin, Se-Jin (Department of Electronics Engineering, Dankook University) ;
- Gong, Myoung-Sun (Department of Chemistry, Dankook University) ;
- Lim, Sung-Kyoo (Department of Electronics Engineering, Dankook University) ;
- Oh, Myoung-Hwan (Department of Electronics Engineering, Dankook University)
- 발행 : 2005.11.10
초록
In the fabrication of high performance red organic light emitting diode, 2-TNA TA [4,4',4" -tris (2-naphthylphenyl- phenylamino)-triphenylamine] as hole injection material and N PH [N,N'-bis (1-naphthyl) -N,N' -diphenyl-1, 1'-biphenyl-4,4'- diamine] as hole transport material were deposited on the ITO (indium tin oxide)/glass substrate by vacuum evaporation, And then, red color emission layer was deposited using Alq3 as a host material and Rubrene (5,6,11,12- tetraphenylnaphthacene) and GDI 4234 as dopants. Finally, small molecular weight OLED with the structure of ITO/2-TNATA/ NPB/Alq3+Rubrene+GDI4234/Alq3/LiF/Al was obtained by in-situ deposition of Alq3, LiF and Al as electron transport material, electron injection material and cathode. respectively. Green OLED fabricated in our experiments showed the color coordinate of CIE(0.65,0.35) and the maximum luminescence efficiency of 2.1 lm/W at 7 V with the peak emission wavelength of 632 nm.