Plastic Strain Ratio and Texture of the ECAPed and Heat-treated Aluminum AA 1050 Sheet

ECAP 한 후 열처리한 알루미늄 AA 1050 합금 판재의 집합조직과 소성변형비 변화

  • ;
  • 이민구 (금오공과대학교 신소재시스템공학부) ;
  • 박병현 (금오공과대학교 신소재시스템공학부) ;
  • 김인수 (금오공과대학교 신소재시스템공학부)
  • Published : 2005.10.01

Abstract

A study on the microstructure, the texture and the formability of the samples after ECAPed and subsequent heat-treated AA 1050 aluminum alloy sheet have been carried out. The specimens after the ECAP showed a very fine grain size, a decrease of <100> // ND. The <110>// ND textures appears in the specimens after the ECAP and subsequent heat-treatment at $400^{\circ}C$ for 1 hour. One of the most important properties in sheet metals is formability. The r-value or plastic strain ratio has was as a parameter that expressed the formability of sheet metals. The change of the plastic Strain ratios after the ECAP and subsequent heat-treatment conditions were investigated and it was found that they were two times higher than those of the initial Al sheets. This could be attributed to the formation above texture components through the ECAP and subsequent heat-treatment of AA 1050 Aluminum alloy sheet.

Keywords