Proceedings of the KIEE Conference (대한전기학회:학술대회논문집)
- 2005.07c
- /
- Pages.2109-2111
- /
- 2005
The characteristic of Hydrogen generation by Plasma reactor using arc like streamer discharge
아크성 스트리머방전을 이용한 플라즈마 반응기의 수소발생 특성
- Kim, J.S. (Division of electrical engineering Kyungnam University) ;
- Park, J.Y. (Division of electrical engineering Kyungnam University) ;
- Jeong, J.G. (Division of electrical engineering Kyungnam University) ;
- Han, S.B. (Division of electrical engineering Kyungnam University) ;
- Koh, H.S. (Division of electrical engineering Kyungnam University) ;
-
Park, S.H.
(Division of electrical engineering Kyungnam University)
;
-
Lee, H.W.
(Division of electrical engineering Kyungnam University)
- 김종석 (경남대학교 전기공학과) ;
- 박재윤 (경남대학교 전기공학과) ;
- 정장근 (경남대학교 전기공학과) ;
- 한상보 (경남대학교 전기공학과) ;
- 고희석 (경남대학교 전기공학과) ;
-
박상현
(경남대학교 전기공학과)
;
-
이현우
(경남대학교 전기공학과)
- Published : 2005.07.18
Abstract
The effect of arc like streamer discharge is investigated on the hydrogen generation in the plasma reactor with multineedle - plate electrode geometry and SDR (Plasma reactor using the surface discharge). An additive of the two type (the saw type and the pellet type) was placed under the water surface to investigate the effect of the water surface conditions. The experimental results are compared in case of the reactor with and without an additive on the water surface. The generation of arc streamer discharge is more powerful with increasing applied voltage in the saw type. The maximum hydrogen Production concentration is about 4300 ppm at 74W in the SDR with additive of the saw type. Also, the Energy yield of the SDR (28990 g/kWh, 4300ppm, 74W) is higher than of the multineedle - plate electrode geometry (20892g/kWh, 3300ppm, 77W).
Keywords