Structural Strength and Fatigue Strength Assessment for Fore/Aft Cargo Hold of 60m Beam VLCC

60m Beam VLCC Fore/Aft Cargo Hold에 대한 구조 안정성 및 피로강도 평가

  • Lee Sang-Woo (Daewoo Shipbuilding and Marine Engineering Co.) ;
  • Choi J.H. (Daewoo Shipbuilding and Marine Engineering Co.) ;
  • Kim M.S. (Daewoo Shipbuilding and Marine Engineering Co.) ;
  • Kim M.S. (Daewoo Shipbuilding and Marine Engineering Co.) ;
  • Lee Y.M. (Daewoo Shipbuilding and Marine Engineering Co.) ;
  • Kim K.S. (Daewoo Shipbuilding and Marine Engineering Co.)
  • Published : 2005.06.01

Abstract

The double hull VLCC(Very Large Crude Oil Tanker) have been designed to have each four(4) longitudinal bulkheads and transverse bulkheads in general. Actually, the inside longitudinal bulkheads among four(4) longitudinal bulkheads, which are extended up to the end of the aft cargo hold for continuity of the members, have been designed with knuckled type inboard due to the narrowed hull shape at bottom region, but sometimes the straight type of longitudinal bulkheads were adopted based on the degree of the hull lines shape. However, regardless the type of longitudinal bulkheads, inside and outside longitudinal bulkheads conflict each other in aft cargo hold region This makes the structure more complex thus giving difficulties to structural design and production. Recently, a vessel of straight type was reported to have cracks on bracket end and tripping bracket toe in aft cargo hold region. As a solution to this problem, in designing the first 60m Beam VLCC, DSME developed a new cargo hold structure which is good in production and structural point of view by structural strength and fatigue analysis of fore and aft cargo hold.

Keywords