미세유체소자 내부에서의 Droplet 형성에 대한 Micro-PIV 측정

Micro-PIV Measurement on the droplet formation in a microfluidic channel

  • 윤상열 (부산대학교 대학원 기계공학과) ;
  • 고춘식 (부산대학교 대학원 기계공학과) ;
  • 김재민 (부산대학교 기계공학과) ;
  • 김경천 (부산대학교 기계공학부)
  • 발행 : 2004.11.03

초록

This experiment has been carried out to measure the process of droplet formation between water phase fluid(PVA 3%) and organic phase fluid(oil) and vector fields measured by a Dynamic Micro-PIV method in the inside of a droplet while generated. Droplet length controlled by changing flow rate conditions in microchannel. Water-in-oil(W/O) droplets successfully generated at a Y junction and cross microchannel. But oil-in-water(O/W) droplets could not be formed at a Y junction microchannel. That is, PVA 3% flow could not be detached from the PDMS surface and ran parallel with oil flow. When PVA 3% flow rate was constant, droplet length and time period decreased as oil flow rate increased, but droplet frequency increased. When PVA 3% and oil flow rate ratio was constant, droplet length and time period decreased as flow rate increased, but droplet frequency increased. All that case, Standard deviation of droplet formation have less than 5% at averaged droplet length and regular-sized droplets were reproducibly formed.

키워드