Compression-Compression Fatigue Behavior of Al-Si-Ca alloy Foams

Al-Si-Ca 합금 폼의 압축 피로 거동

  • 이창훈 (공주대학교 기계공학과 대학원) ;
  • 하산 (공주대학교 기계공학과 대학원) ;
  • 김엄기 (공주대학교 기계공학부) ;
  • 정길도 (공주대학교 기계공학과 대학원)
  • Published : 2004.11.03

Abstract

The compression-compression fatigue properties of the closed cell Al-Si-Ca alloy foams have been studied. The monotonic and cyclic compressive properties were compared with each other and the fatigue stress-life (S-N) curves were presented. In compression-compression fatigue, the crushing was found to initiate in a single band which broadens gradually with additional fatigue cycles. Progressive shortening of the specimen took place due to a combination of low cycle fatigue failure and cyclic ratcheting which is in accordance with the findings of previous researchers [1-3]. Young's modulus of the foam was found to decrease with the increasing strain in case of fatigue test however in case of monotonic compression test the value of Young's modulus increased with the strain (number of cycles). The endurance limit on the basis of $10^{7}$ cycles obtained by extrapolating the experimental results were 0.98 MPa and 1.70 MPa for load ratios 0.1 and 0.5 respectively which are 34 % and 59 % of the plateau stress.

Keywords