Forming Simulation of the Extrn-Bending Process of the Angle Product with '${\wedge}$' Section

[ '${\wedge}$' ]단면 앵글 구조재의 압출굽힘 가공에 관한 성형해석

  • 이경국 (부경대학교 대학원 기계공학과) ;
  • 진인태 (부경대학교 기계공학부)
  • Published : 2004.10.01

Abstract

In the previous experimental study about extru-bending of angle product, the bending of extruded angle products with the '${\wedge}$' section and 'ㄱ' section can be abtained by the hot metal extru-bending machine with the two punches moving in the different velocity. The bending curvature can be controlled by the different velocity of billets through the two-hole container. This paper describes simulation of extru-bending process by the difference of punch velocities. The result of the forming simulation by $DEFORM^{TM}-3D$ shows that the bending phenomenon at the die exit during extrusion can be abtained by the two punches moving in the different velocity. And it is possible to design extrusion dies and to control the curvature of product through the simulation of extru-bending process by analysis

Keywords