한국전기전자재료학회:학술대회논문집 (Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference)
- 한국전기전자재료학회 2004년도 춘계학술대회 논문집 방전 플라즈마 유기절연재료 초전도 자성체연구회
- /
- Pages.25-29
- /
- 2004
폴리머 애자의 End-fitting 설계 및 성능 평가기술
End-fitting Design and Performance Evaluation of Polymer Insulator
-
조한구
(한국전기연구원) ;
- 이운용 (한국전기연구원) ;
-
한세원
(한국전기연구원) ;
-
한동희
(한국전기연구원) ;
- 지원영 ((주)해룡실리콘) ;
- 여학규 ((주)해룡실리콘) ;
- 강두원 (구주기술(주)) ;
- 천종욱 (구주기술(주)) ;
- 이형규 (삼홍중전기기공업(주))
-
Cho, H.G.
(KERI) ;
- Lee, U.Y. (KERI) ;
-
Han, S.W.
(KERI) ;
-
Han, D.H.
(KERI) ;
- Ji, W.Y. (Hae Ryong Silicone Co. Ltd) ;
- Yeo, H.G. (Hae Ryong Silicone Co. Ltd) ;
- Kang, D.W. (Guju Tech. Inc) ;
- Chun, J.U. (Guju Tech. Inc) ;
- Lee, H.K. (Sam-heung Co. Ltd)
- 발행 : 2004.05.21
초록
Corona on polymer materials causes deterioration by the combined action of the discharge striking the surface and the action of certain chemical compounds that are formed by the discharges. In the design and manufacture of polymer insulators must be sufficiently large to avoid corona discharges, otherwise a shielding or corona ring (grading ring) needs to be installed on the insulator. To conduct this purpose, many researchers have investigated end-fitting of polymer insulator by voltage distribution simulation and electrical test. Grading rings are used to improve the performance of the insulator in multiple ways. They can reduce corona and associated audible noise and radio influence and television interference. The factors determining the uses of a grading ring are line voltage, geometry and dimensions of end fittings, geometry and dimensions of line hardware, and environmental conditions. In this paper, electrical property of polymer insulator with end-fitting design have been investigated by electrical field analysis, various end-fitting design, tracking wheel test, corona inception voltage and extinction voltage. Electrical field analysis is conducted by FEM program and various end-fitting is designed through this result. Designed end-fittings are manufactured and their performance is conducted by electrical performance test.