한국의학물리학회:학술대회논문집 (Proceedings of the Korean Society of Medical Physics Conference)
- 한국의학물리학회 2004년도 제29회 추계학술대회 발표논문집
- /
- Pages.64-66
- /
- 2004
반복적인 방법을 이용한 임의의 DR detector 위치에서의 flat field correction 방법 연구
An Iterative Method for Flat-Field Correction of Digital Radiography When Detector is at Any Position
- 김도일 (가톨릭대학교 의공학교실) ;
- 이형구 (가톨릭대학교 의공학교실) ;
- 김성현 (가톨릭대학교 의공학교실) ;
- 박대섭 (가톨릭대학교 의공학교실) ;
- 최보영 (가톨릭대학교 의공학교실) ;
- 서태석 (가톨릭대학교 의공학교실)
- Kim, Do-Il (Dapartment of Biomedical Engineering, College of Medicine, Catholic University of Korea) ;
- Lee, Hyoung-Koo (Dapartment of Biomedical Engineering, College of Medicine, Catholic University of Korea) ;
- Kim, Sung-Hyeon (Dapartment of Biomedical Engineering, College of Medicine, Catholic University of Korea) ;
- Park, Dae-Sop (Dapartment of Biomedical Engineering, College of Medicine, Catholic University of Korea) ;
- Choe, Bo-Young (Dapartment of Biomedical Engineering, College of Medicine, Catholic University of Korea) ;
- Suh, Tae-Suk (Dapartment of Biomedical Engineering, College of Medicine, Catholic University of Korea)
- 발행 : 2004.11.26
초록
디지털 래디오그래피 시스템을 이용하여 환자를 진료하기 위해서는 전처리 과정을 통해 DR 디텍터의 불량화소와 선을 제거하고 offset과 X선의 불균질성을 제거해야만 한다. 불균질성을 제거하기 위해 X-선의 flat field 영상이 필요하며 이는 X선관의 focal spot과 디텍터의 중심과 일치시켜 X선을 디텍터에 수직으로 입사시켜 얻는다. 이러한 영상 촬영구조는 환자를 촬영할 때에도 그대로 유지된다. 하지만 방사선 촬영 기법 중 여러 가지 요인으로 디텍터의 중심과 X선관의 중심을 일치시키지 않거나 디텍터를 기울여 촬영하는 방법들이 있다. 본 연구에서는 디텍터가 기울어져 있거나 또는 임의의 위치에서의 flat field correction 방법의 영향을 분석하고, 새로운 알고리즘을 이용하여 그 영향을 줄이고자 하였다. 본 연구의 결과로 DR 디텍터에서 X선의 flat field를 최대한 보장할 수 있을 것이다.
When examing patients with DRs it is necessary to remove bad pixels and lines and to correct non-uniform offsets and x-ray field. For non-uniformity correction a flat field x-ray image is needed, and to obtain it the center of detector is usually aligned with the focal spot of the x-ray tube, which is conserved when examing patients to preserve the flat field. In some of radiographic techniques, however, it is necessary to move the x-ray tube off the center position of detector or tilt the detector. We investigated the effect of detector tilting on the non-uniformity correction, and propose a method to reduce the effect using a new algorithm. The flat field of X-ray in the DR detector could be guaranteed with this result.