Strength Estimation of Injection Molded Plastic Stepped Spur Gear

사출 성형 플라스틱 단붙이 기어의 강도평가

  • 정태형 (한양대학교 기계공학과) ;
  • 문창기 (한양대학교 대학원 기계설계학과) ;
  • 하영욱 (한양대학교 대학원 기계설계학과)
  • Published : 2004.10.01

Abstract

The aim of this study is to estimate the strength of injection molded plastic stepped gear. We considered stepped gear as plate model which are fixed by two edges. While, on the other sides are free. Normal gear is calculated by Lewis formula which can be derived quite simply from the equation for the stress at the root of a cantilever beam. Stress ratio(step factor) is represented for the ratio of the bending stress of normal and the bending stress of stepped gear, and it is plotted by face width factor. This study is propose the step factor added in Dupont equation which are strength estimation of step gear

Keywords