Experimental Study on the Leakage Performance Characteristics of floating Ring Seal

플로팅 링 실의 누설 특성에 관한 실험적 연구

  • 안경민 (한국과학기술연구원 트라이볼로지연구센터) ;
  • 이용복 (한국과학기술연구원 트라이볼로지연구센터) ;
  • 김창호 (한국과학기술연구원 트라이볼로지연구센터) ;
  • 하태웅 (경원대학교 건축설비ㆍ기계공학부)
  • Published : 2004.05.01

Abstract

The floating ring seal is used in an oxidizer and a fuel pump of the turbo pump unit in the liquid rocket engine to optimize a leakage without rubbing phenomenon. The damper floating ring seal, one of the floating ring seals, is with round hole pattern surfaces. It can reduce the leakage by increased friction factor that obtained from experimental data. In this paper, the leakage test about floating ring seal and damper floating ring seal was conducted. The test result showed the leakage performance of damper floating ring seal was better than the leakage performance of floating ring seal. With the leakage test the lock-up and rotation test about seal was conducted and that position is measured. The relatively large lock-up eccentric ratio was obtained from the test result of damping floating ring seal. The attitude angle of seal increases with increasing of shaft rotation

Keywords