Proceedings of the KSME Conference (대한기계학회:학술대회논문집)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지

Experimental Comparison of Weld Zone Properties for $2mm^{t}$ Aluminum Alloy Sheets Friction-Stir-Welded using Milling Machine.

마찰용접 된 박판재의 용접부 특성에 대한 실험 비교

  • 한민수 (목포해양대학교 대학원) ;
  • 장석기 (목포해양대학교 기관시스템공학부) ;
  • 이돈출 (목포해양대학교 기관시스템공학부)
  • Published : 2003.11.05
Download PDF
⟨ Previous Next ⟩

Abstract

The paper shows properties such as vickers hardness, yielding and ultimate stresses for the weld zone of the butt and the lap jointed specimens, and compare maximum loads, stress-strain curves, deformation appearance after guided bending test and fracture appearance for butt and lap jointed specimens. The research in this experiment also shows the weldability of the butt joint specimen is better than that of the lap joint specimen using FSW with $2mm^{t}$ aluminum alloy sheet in milling machine.

Keywords