Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference (한국전기전자재료학회:학술대회논문집)
- 2003.07a
- /
- Pages.597-600
- /
- 2003
Fabrication and evaluation of superconducting properties of HIS PIT long tapes
고온초전도 PIT 장선재 제조 및 특성 평가
-
Ha, Hong-Soo
(KERI) ;
- Lee, Dong-Hoon (KERI) ;
- Yang, Joo-Saeng (KERI) ;
- Hwang, Sun-Yuk (KERI) ;
- Choi, Jung-Kyu (KERI) ;
- Kim, Sang-Chul (NexansKorea) ;
-
Ha, Dong-Woo
(KERI) ;
-
Oh, Sang-Soo
(KERI) ;
-
Kwon, Young-Kil
(KERI)
-
하홍수
(한국전기연구원) ;
- 이동훈 (한국전기연구원) ;
- 양주생 (한국전기연구원) ;
- 황선역 (한국전기연구원) ;
- 최정규 (한국전기연구원) ;
- 김상철 (넥상스코리아) ;
-
하동우
(한국전기연구원) ;
-
오상수
(한국전기연구원) ;
-
권영길
(한국전기연구원)
- Published : 2003.07.10
Abstract
Bi-2223/Ag HTS wires have been fabricated by the PIT(powder in tube)process. Intermediate annealing was carried out to increase the homogenization and uniformity of the superconducting filaments embedded in the silver matrix during the deformation process that is important to sustain the engineering critical current density in long superconducting wire. Intermediate annealing act to release the deformation hardening of the superconducting wires during drawing process. Rolling parameters were investigated to roll the superconducting tapes with uniform thickness, width and winding tensions. Critical current of 60 m long superconducting tapes was measured 54.3 A continuously after final sintering heat treatment. The phase analysis of Bi-2223/Ag superconducting tapes are examined by the XRD.